Belt Type High gradient Magnetic Separator
Belt Type High Gradient Magnetic Separator
What for?
GTEK belt type high gradient magnetic separator is mainly suitable for the separation of weak magnetic minerals with a particle size of less than 5mm.
Belt type high gradient magnetic separator can also using for iron removal of non-metallic minerals, such as: mica powder, quartz sand, potash feldspar, nepheline, fluorite, sillimanite, spodumene, kaolin, manganese ore , Weak magnetite, pyrrhotite, roasted ore, ilmenite, hematite, limonite, siderite, chromite, wolframite, tantalum-niobite, red mud, etc. It can also be used to remove iron from coal, non-metallic minerals, building materials, etc.
Belt Type High Gradient Magnetic Separator Decription
GTEK belt or plate type high gradient magnetic separator is suitable for the iron removal and purification of wet processing non-metallic ores, especially the wet iron removal of non-metallic ores such as silica sand, quartz sand, potassium and sodium feldspar. In addition, it has a good sorting effect for weak magnetic minerals such as hematite, limonite, mirror iron ore, siderite, manganese ore, tantalum ore.
GTEK belt type high gradient magnetic separator is a brand-new magnetic separation equipment.
GTEK summarized the advantages and disadvantages of traditional magnetic separation equipment, breaks the conventional design concept, integrates magnetic separation and reselection, and has been carefully developed.
It has the advantages of high magnetic field strength, significant iron reduction effect, large processing capacity, energy saving, water saving and simple use.
Features
- High magnetic field strength: The magnetic system is made of high-performance rare-earth NdFeB Magnetic Material, with a wide polypolar surface, a large number of magnetic poles, high magnetic induction intensity, a large magnetic field gradient, and a local maximum magnetic field of up to 16000Gs.
- Large available magnetic area: the current maximum width of magnetic area can be 2.5 meters, and the maximum length direction can be up to 3 meters.
- Efficient iron unloading: Custom-developed a variety of special iron unloading belts for your choice, using high-strength and high-quality composite materials, long service life, and obvious iron unloading effect.
- Energy saving and water saving: Only use low power drive motor, low energy consumption electrode, unique controllable water supply system design, save water consumption.
How Does a Belt Type High Gradient Magnetic Separator Work?
GTEK belt type high gradient magnetic separator can continuously separate magnetic impurities from the product stream. It consists of a fuselage, a continuously running belt system, a huge permanent magnet, a feed inlet and a discharge base.
The powerful permanent magnet is placed in the middle part of the belt, just below the feed inlet.
When feeding, the iron impurities in the product stream will be absorbed in the magnetic field area and transported upward through the belt, in the opposite direction of the non-magnetic material.
When the magnetic impurities are transported to the end of the magnetic field area, the magnetic impurities will stay at the end to gather into a cluster due to the action of the magnetic force, and then be pushed out of the magnetic field area by the rids on the belt. Eventually washed away by water and fall off the belt.
More Knowledge About GTEK Belt Type High Gradient Separator
Send Us a Message
NEED MAGNETS?
WE ARE HERE TO HELP!
Welcome to contact us by submitting the contact form or write to us directly through the contact info below:
For more information about any of our services, don’t hesitate to get in touch. Our team are always happy to help provide information and suggestion.
MAGNETIC FORCE BY GTEK™